>> Silver-Tungsten Alloys

• 

  Silver-Tungsten Alloys Bar

  Silver alloy composed of silver and tungsten, binary alloy of silver and tungsten. Tungsten silver is a silver alloy composed of silver and tungsten, a binary alloy of silver and tungsten. Used as low-voltage power switches, lifting switches, locomotive switches, pre-contacts of high-current switches, as well as heavy-load relays, air circuit breakers, etc. Adding cobalt can improve the wettability of silver to tungsten and reduce contact resistance. The produced tungsten-silver alloy conforms to the national standard GB/T8320-2003 and ASTM B631 standard.

• 

  Silver-Tungsten Alloys Bar

  Silver alloy composed of silver and tungsten, binary alloy of silver and tungsten. Tungsten silver is a silver alloy composed of silver and tungsten, a binary alloy of silver and tungsten. Used as low-voltage power switches, lifting switches, locomotive switches, pre-contacts of high-current switches, as well as heavy-load relays, air circuit breakers, etc. Adding cobalt can improve the wettability of silver to tungsten and reduce contact resistance. The produced tungsten-silver alloy conforms to the national standard GB/T8320-2003 and ASTM B631 standard.

• 

  Silver-Tungsten Alloys Plate

  silver-tungsten alloy is produced by vacuum infiltration method, and the produced tungsten-silver alloy conforms to the national standard GB/T8320-2003 and ASTM B631 standard. Absolutely no holes high conductivity

• 

  Silver-Tungsten Alloys Bar

  Silver alloy composed of silver and tungsten, binary alloy of silver and tungsten. Tungsten silver is a silver alloy composed of silver and tungsten, a binary alloy of silver and tungsten. Used as low-voltage power switches, lifting switches, locomotive switches, pre-contacts of high-current switches, as well as heavy-load relays, air circuit breakers, etc. Adding cobalt can improve the wettability of silver to tungsten and reduce contact resistance. The produced tungsten-silver alloy conforms to the national standard GB/T8320-2003 and ASTM B631 standard.

• 

  Non-Sag Silver-Tungsten Alloys Plate

  Non-Sag silver-tungsten alloy is produced by vacuum infiltration method, and the produced tungsten-silver alloy conforms to the national standard GB/T8320-2003 and ASTM B631 standard. Absolutely no holes high conductivity

• 

  W alloy

  ASTM B 777 Class 1 Class 2 Class 3 Class 4 Tungsten Nominal % 90 92.5 95 97 Density (g/cc) 16.85-17.25 17.15-17.85 17.75-18.35 18.25-18.85 Hardeness (HRC) 32 33 34 35 Utimate Tensile Strength ksi 110 110 105 100 Mpa 758 758 724 689 Yield Strength at 0.2% off-set ksi 75 75 75 75 Mpa 517 517 517 517 Elongation (%) 5 5 3 2