Length |
20mm-1000mm |
Width: |
20mm-250mm |
Wall Thickness: |
0.2mm-10mm |
TZM alloy has excellent high temperature strength, higher recrystallization temperature and good thermal conductivity. It is widely used in the aerospace, aviation. It could be used as nozzle material, valve body, gas piping materials, tubes int he gate material, die casting molds, extrusion dies and high temperature furnace heating element and heat shield etc. Chemical Composition: Mo + 0.40-0.55%Ti + 0.06-0.12%Zr + 0.01-0.04%C
MoLa tray is mainly used for metals or sintering and annealing of the non-metals under reducing atmosphere. They are applied to boat sintering of powder products such as delicately sintered ceramics. Under certain temperature, molybdenum lanthanum alloy is easier to be re-crystallized which means it is not easy to deform and has a longer service life. Molybdenum lanthanum tray is exquisitely made by high density of molybdenum, lanthanum plates and excellent machining techniques. Normally molybdenum lanthanum tray is processed by riveting and welding.
Atomic number | 42 |
CAS number | 7439-98-7 |
Atomic mass | 95.94 [g/mol] |
Melting point | 2620 °C |
Boiling point | 4639 °C |
Density at 20 °C | 10.22 [g/cm³] |
Crystal structure | Body-centered cubic |
Coefficient of linear thermal expansion at 20 °C | 5.2 × 10-6 [m/(mK)] |
Thermal conductivity at 20 °C | 142 [W/(mK)] |
Specific heat at 20 °C | 0.25 [J/(gK)] |
Electrical conductivity at 20 °C | 17.9 × 106 [S/m] |
Specific electrical resistance at 20 °C | 0.056 [(Ωmm2)/m] |
Molybdenum box/trays are mainly used for sintering and annealing both metal and nonmetal materials in reduction atmosphere;
They're also applied in sintering boat for powder products, such as sintering precision ceramics.