Diameter |
0.125″ (3.18 mm) – 6″ (152 mm) |
Length |
Various lengths are available |
Purity |
Mo≥99.95% |
Material |
Pure Molybdenum, Molybdenum TZM, Mo- La alloy |
Standard |
ASTM B-387 |
Molybdenum rod and molybdenum bar are formed by sintering molybdenum powder. Molybdenum rod has a high melting point, good thermal conductivity, and low thermal expansion performance. It can be used to manufacture electric vacuum devices and electric light source parts, and can also be used as high-temperature heating elements, high-temperature structural parts, electrodes, etc.
Please view molybdenum rod to see our standard sizes of round bars. The above are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of the molybdenum bar that you require, please feel free to contact us.
Molybdenum Rod Surface
Cleaned: The surface is chemically cleaned to remove all lubricants and oxides.
Black: The surface is either as swaged or as drawn and retains a coating of processing lubricants and oxides.
Chemical composition
Grade |
Molybdenum(Mo) (%) |
The impurity content is not more than (%) |
|||||||
Fe |
Ni |
Al |
Si |
Mg |
C |
N |
O |
||
Mo-1 |
99.95 |
0.01 |
0.005 |
0.002 |
0.01 |
0.005 |
0.01 |
0.003 |
0.008 |
Atomic number | 42 |
CAS number | 7439-98-7 |
Atomic mass | 95.94 [g/mol] |
Melting point | 2620 °C |
Boiling point | 4639 °C |
Density at 20 °C | 10.22 [g/cm³] |
Crystal structure | Body-centered cubic |
Coefficient of linear thermal expansion at 20 °C | 5.2 × 10-6 [m/(mK)] |
Thermal conductivity at 20 °C | 142 [W/(mK)] |
Specific heat at 20 °C | 0.25 [J/(gK)] |
Electrical conductivity at 20 °C | 17.9 × 106 [S/m] |
Specific electrical resistance at 20 °C | 0.056 [(Ωmm2)/m] |
Furnace pillars for sapphire crystal furnaces and other vacuum furnaces
Furnace heater for sapphire crystal furnaces and other vacuum furnaces
Tungsten headpieces for the industries of quartz
Stirring bars for glass smelting and rear-earth smelting